MPN ST10000NM013G Specifications 12Gb/s SAS Capacity 10TB Standard Model FastFormat TM (512e/4Kn) Note1 ST10000NM013G Note1: FastFormat models ship in 512e format state. When switching from 512e to 4Kn by executing the FastFormat routine, all data on the drive will be deleted. Note that data must be aligned to 4K sectors to see improved performance in 4Kn fomat. Features Helium Sealed-Drive Design Yes Conventional Magnetic Recording (CMR) Yes Protection Information (T10 DIF) Yes Super Parity Yes Low Halogen Yes PowerChoice TM Idle Power Technology Yes PowerBalance TM Power/Performance Technology Yes Hot-Plug Support Note3 Yes Note3: Supports Hotplug operation per Serial ATA Revision 3.3 specification Cache, Multisegmented (MB) 256 Organic Solderability Preservative Yes RSA 3072 Firmware Verification (SD and D) Yes Reliability/Data Integrity Mean Time Between Failures (MTBF, hours) 2,500,000 Reliability Rating at Full 24x7 Operation (AFR) 0.35% Nonrecoverable Read Errors per Bits Read 1 sector per 10E15 Power-On Hours per Year (24x7) 8760 512e Sector Size (Bytes per Sector) 512, 520, 528 4Kn Sector Size (Bytes per Sector) 4096, 4160, 4224 Performance Spindle Speed (RPM) 7200RPM Interface Access Speed (Gb/s) 12.0, 6.0, 3.0 Max. Sustained Transfer Rate OD (MB/s,MiB/s) 270/258 Random Read/Write 4K QD16 WCD (IOPS) 170/550 Average Latency (ms) 4.16 Interface Ports Dual Rotation Vibration at 20-1500 Hz (rad/sec 2 ) 12.5 Power Consumption Idle A (W) Average 4.9W Max Operating, Random Read/Write 4K/16Q (W) 9.0, 5.9 Power Supply Requirements +12 V and +5 V Environmental Temperature, Operating ( o C) 5 o C - 60 o C Vibration, Nonoperating: 2 to 500Hz (Grms) 2.27 Shock, Operating 2ms (Read/Write) (Gs) 50 Shock, Nonoperating 2ms (Gs) 200
MPN SFYRS/1000G Form Factor M.2 2280 Interface PCIe 4.0 NVMe Capacities 1TB Controller Phison E18 NAND 3D TLC Sequential Read/Write 1TB 7,300/6,000MB/s Random 4K Read/Write 1TB up to 900,000/1,000,000 IOPS Total Bytes Written (TBW) 1TB 1.0PBW Power Consumption 1TB 5mW Idle / 0.33W Avg / 2.8W (MAX) Read / 6.3W (MAX) Write Storage Temperature -40 o C-85 o C Operating Temperature 0 o C-70 o C Vibration Operating 2.17G Peak (7-800Hz) Vibration Non-operating 20G Peak (20-1000Hz) MTBF 1,800,000 hours
MPN WD40EZAZ Capacity 4 TB Interface SATA Form Factor 3.5 Inch Cache Size 256 MB Disk Speed (RPM) 5400rpm Compatibility Windows 10. Windows 8.1, Windows 7 macOS High Sierra TM , Sierra El Capitan Note: Compatibility may vary depending on users hardware configuration and operating system. Acronis TM True Image TM WD Edition designed to work with Windows systems only.
MPN ST8000VE001 Capacity 8TB Interface SATA 6 Gb/s Recording Technology CMR Drive Design Air Features and Performance Drive Bays Supported 16+ AI Channels 32 AI Real Time Capture Events/Sec Up to 120 AI Real Time Compare Events/Sec Up to 96 HD Cameras Supported Up to 64 RV Sensors Yes Max. Sustained Transfer Rate OD (MB/s) 235MB/s Cache (MB) 256 Reliability/Data Integrity Tarnish Resistant Yes Load/Unload Cycles 300,000 Non-recoverable Read Errors Rate, Max 1 per 10E15 Power-On Hours per year 8,760 Workload Rate Limit (WRL) 550 Mean Time Between Failures (MTBF) (hours) 2,000,000 hr Rescue Data Recovery Services (years) 3 Power Management Startup Current, Typical (12V, A) 1.8 Average Operating Power (W) 8.73 W Idling Average (W) 7.5 W Standby Mode/Sleep Mode, Typical (W) 0.96/0.96 Voltage Tolerance (5 V) +10%/-5% Voltage Tolerance (12 V) +/-10% Environmental/Temperature Operating (ambient, min o C) 5 Operating (drive case, max o C) 70 Non-operating (ambient, min o C) -40
MPN SKC3000D/4096G Form Factor M.2 2280 Interface PCIe 4.0 NVMe Capacities 4096GB Controller Phison E18 NAND 3D TLC Sequential Read/Write 4096GB 7,000/7,000MB/s Random 4K Read/Write 4096GB up to 1,000,000/1,000,000 IOPS Total Bytes Written (TBW) 4096GB 3.2PBW Power Consumption 4096GB 5mW Idle / 0.36W Avg / 2.7W (MAX) Read / 10.2W (MAX) Write Storage Temperature -40 o C-85 o C Operating Temperature 0 o C-70 o C Vibration Operating 2.17G Peak (7-800Hz) Vibration Non-operating 20G Peak (20-1000Hz) MTBF 1,800,000 hours
MPN SSDPF21Q800GB01 Essentials Product Collection Intel Optane TM DC SSD Series Code Name Products formerly Alder Stream Capacity 800 GB Performance Specifications Sequential Bandwidth - 100% Read (up to) 7200 MB/s Sequential Bandwidth - 100% Write (up to) 6100 MB/s Random Read (100% Span) 1500000 IOPS Random Write (100% Span) 1350000 IOPS Latency - Read 5 microsecond Latency - Write 5 microsecond Power - Active 18W Power - Idle 4.2W Reliability Vibration - Operating 2.17 Grms, (5-700 Hz), random Vibration - Non-Operating 3.13 Grms (5-800 Hz), random Shock (Operating and Non-Operating) 1,000 G, 0.5 ms, half sine Operating Temperature Range 0 o C to 70 o C Operating Temperature (Maximum) 70 o C Operating Temperature (Minimum) 0 o C Endurance Rating (Lifetime Writes) 100 DWPD Mean Time Between Failures (MTBF) 2 Million Hours Uncorrectable Bit Error Rate (UBER) less than 1 sector per 10 17 bits read Package Specifications Components Intel(R) Optane(TM) Memory Media Form Factor 2.5" 15mm Interface PCIe 4.0 x4, NVMe Advanced Technologies Enhanced Power Loss Data Protection Yes Hardware Encryption AES 256 bit High Endurance Technology (HET) Yes Temperature Monitoring and Logging Yes End-to-End Data Protection Yes
MPN ST8000NM001A Specifications 512e SAS Capacity 8TB Features Protection Information (T10 DIF) Yes Humidity Sensor Yes SuperParity Yes Low Halogen Yes PowerChoice TM Technology Yes PowerBalance TM Technology Yes Cache, Multi-segmented (MB) 256 Advanced Write Caching (Internal NOR flash) Yes Reliability/Data Integrity Vibration, Nonoperating: 10Hz to 500Hz (Grms) 5 MTBF 2,000,000hr Reliability Rating at Full 24x7 Operation (AFR) 0.44% Nonrecoverable Read Errors per Bits Read, Max 1 sector per 10E15 Power-On Hours 8760 Bytes per Sector 512, 520, 528 Performance Spindle Speed (RPM) 7200 Interface Access Speed (Gb/s) 12.0, 6.0, 3.0 Max Sustainable Transfer Rate 249MB/s Average Latency (ms) 4.16 Interface Ports Dual Rotational Vibration at 1500Hz (rad/s 2 ) 12.5 Power Consumption Idle Average (W) 7.97 W Average Operating Power 13.18 W Power Supply Requirements +12 V and +5 V Environmental/Temperature Temperature, Operating ( o C) 5 o C - 60 o C Shock, Operating Read/Write (Gs) 70/40Gs Shock, Nonoperating, 1ms/2ms (Gs) 150/300
MPN ST1000NX0453 Generation V.3 Capacity 1TB Interface SAS 12GB/s Spin Speed 7200 RPM Cache 128MB Areal Density 640 Maximum Operating Shock 25Gs Operating Temperature 55 C Features PowerChoice On-Demand Power Option Protection Information Low Halogen RAID Rebuild
MPN ST1000NX0423 Generation V.3 Capacity 1TB Interface SATA 6Gb/s Spin Speed 7200 RPM Cache 128MB Areal Density 640 Maximum Operating Shock 25Gs Operating Temperature 55 C Average Operating Power 4.74W Features PowerChoice On-Demand Power Option Low Halogen RAID Rebuild
MPN SSDPEL1K200GA01 Essentials Capacity 200 GB Status Launched Performance Sequential Read (up to) 2200 MB/s Sequential Write (up to) 2000 MB/s Random Read (100% Span) 550000 IOPS Random Write (100% Span) 400000 IOPS Latency - Read 10 microsecond Latency - Write 12 microsecond Power - Active 9 W Power - Idle 3 W Reliability Vibration - Operating 2.17 GRMS Vibration - Non-Operating 3.13 GRMS Shock (Operating and Non-Operating) 1000 G/0.5 msec Operating Temperature Range 0 o C to 70 o C Endurance Rating (Lifetime Writes) 21.9 PBW Mean Time Between Failures (MTBF) 2 million hours Uncorrectable Bit Error Rate (UBER) 1 sector per 10 17 bits read Package Specifications Form Factor M.2 22 x 110mm Interface PCIe NVMe 3.0 x4 Advanced Technologies Enhanced Power Loss Data Protection Yes Hardware Encryption AES 256 bit High Endurance Technology (HET) Yes Temperature Monitoring and Logging Yes End-to-End Data Protection Yes Intel Smart Response Technology No Intel Remote Secure Erase No Intel Rapid Start Technology No
MPN SNV3510-400G Hardware specifications Model number SNV3510-400G Capacity 400 GB Form factor M.2 22110 Interface NVMe PCIe 3.0 x4 Performance Sequential read (128 KB, QD32) 3,000 MB/s Sequential write (128 KB, QD32) 750 MB/s Random read (4 KB, QD256) 225,000 IOPS Random write (4 KB, QD256) 45,000 IOPS Endurance and Reliability Terabytes Written (TBW) 491 TB Mean Time Between Failures (MTBF) 1.8 million hours Uncorrectable Bit Error Rates (UBER) less than 1 sector per 10 17 bits read Power loss protection Yes Power Consumption Supply voltage 3.3 V (+/-5%) Active read (Typ.) 4.0 W Active write (Typ.) 3.6 W Idle 1.6 W Temperature Operation temperature 0 o C to 70 o C (32 o F to 158 o F) Storage temperature -40 o C to 85 o C (-40 o F to 185 o F)
MPN SAT5210-960G General Capacity 960 GB Form Factor 2.5" 7mm Interface SATA 6 Gb/s Performance Sustained Sequential read (128 KB, QD32) 530 MB/s Sustained Sequential write (128 KB, QD32) 500 MB/s Sustained Random Read (4KB, QD32) 98,000 IOPS Sustained Random Write (4KB, QD32) 67,000 IOPS Notes All performance measurement were reached in full sustained mode based on the JESD219A enterprise workload, defined by JEDEC Solid State Technology Association. Endurance and Reliability Terabytes Written (TBW) 2,194 TB Mean Time Between Failures (MTBF) 1.5 million hours Uncorrectable Bit Error Rate (UBER) less than 1 sector per 10 17 bits read Power Loss Protection Yes Notes Based on the JESD219A enterprise workload. Power Consumption Supply Voltage 5V (+/- 5%) Active Read (Typ.) 2.7 W Active Write (Typ.) 2.8 W Idle 1.4 W Notes Power consumption may differ according to configurations and platforms. Temperature Operating Temperature 0 o C to 70 o C (32 o F to 158 o F) Storage Temperature -40 o C to 85 o C (-40 o F to 185 o F) Certification FCC CE EAC BSMI VCCI RCM KC RoHS UKCA